WELDER POWER SUPPLY REPLACEMENT POWER DIODES     

Miller Electric®/ Linde®, L-Tec®, Esab® power supplies, use the following three individual power diodes.

A) Both Diodes are 150 amp rating/300 Volts and have a 3/8" stud. New mounting hardware is included.

 Straight Polarity                 

B) Both Diodes are 150 amp rating/300 Volts and have a 1/2" stud. New mounting hardware is included.

C) Both Diodes are 275 amp rating/300 Volts and have a 3/4" stud. New mounting hardware is included.

D) Integrated bridge Rectifier (Cube, Full Wave bridge Rectifier) Rated at 50 amps 1000 PIV

Miller® P/N: 035704

E) Silicone Bridge Rectifiers Power Paks

Contact us at the phone number below or send us an email.

These rectifier power paks are an assembly of four smaller silicone diodes that are paralleled to increase total current ratings. The diodes are embedded in an aluminum plate to assure electrical and thermal conductivity. Air flow is channeled over and through the assembly to assure thermal stability. This is a very compact assembly that makes it an ideal unit to retrofit older machines and as a replacement for selenium rectifiers.

CALL US AT: 800-460-6474                                FAX: 281-749-8117

CLICK ON THE ENVELOPE AND SEND US A MESSAGE!

CLICK ON THE BLUE SQUARE TO RETURN TO OUR HOME PAGE

"MILLER ELECTRIC" is a registered trademark and property of Illinois Tool Inc. Weldmart-Online is in no way affiliated with the Illinois Tool Works Company. References to the named torches, machines, and part numbers are for the convenience of our customers only. This web page is copyrighted by Weldmart-Online and reproduction In any form is prohibited by law.