|
COMMON SENSE ANSWERS FOR THE WELDING FABRICATION INDUSTRY
CALL US: 800-460-6474 FAX: 281-749-8117
INTERNATIONAL: 1-281-432-0250
|
|||
|
WELDMART REVOLUTION "LONG JOHN" SPOOL GUN, THE SPOOL GUN TO REPLACE YOUR EXPENSIVE "OTC-MIG-BOY®". OUR GUN USES STANDARD WELDING WIRE ON STANDARD FOUR-IN SPOOLS. CUT YOUR MIG CONSUMABLE COST IN HALF! WITH A 9 5/8" REACH YOU ARE ABLE TO WELD YOUR DEEPEST CHANNEL LETTER; FAST, CLEAN, AND INEXPENSIVELY! |
|||
|
THE "LONG-JOHN" SPOOL GUN IS A MODIFICATION OF THE REVOLUTION SPOOL GUN FOR APPLICATIONS FOR CHANNEL-LETTERS AND OTHER FABRICATION PROCESS WHERE DEEP NARROW ACCESS IS NEEDED. THIS GUN WITH THE TRAFIMET CONTROL CAN BE EASILY CONNECTED TO MOST CONSTANT POTENTIAL DC POWER SUPPLIES. THIS PAGE SHOWS THE REVOLUTION SYSTEM FOR THE OTC/ DAIHEN® MIG-BOY® SYSTEM. |
|||
|
|
|
||
|
|
|
||
|
THIS GUN WAS ORIGINALLY DEVELOPED AS A REPLACEMENT FOR THE DAIHEN (OTC) WTG-43 (MIG-BOY) SPOOL GUN. OUR CUSTOMER'S ARE CONCERNED WITH THE COST AND AVAILABILITY OF WELDING WIRE ON PROPRIETARY SPOOLS . THE LONG JOHN GUN USED WIRE ON STANDARD 4" INCH SPOOLS-AVAILABLE AT ANY WELDING SUPPLY! GUN CONSUMABLES ARE INEXPENSIVE AND AVAILABLE ANYWHERE. The Revolution Spool Gun with extended barrel.
|
|||
|
|
|||
|
A ten inch reach and only 2.4 pound empty |
|||
|
|
.
|
|
|
|
Weldmart "Long-John" upgrade kit contains everything you need to start welding "out of the box"! The spool has an OTC/Daihen power pin that connects to your MIG 135 power supply. You connect the gas hose to the Mig Boy power supply. The control box controls the spool gun motor speed. With this system you can attach our spool gun to ANY CONSTANT POTENTIAL (MIG) POWER SUPPLY! |
|||
|
|
|||
|
REVOLUTION SPOOL GUN BARREL AND CONSUMABLE DIMENSIONS |
|||
|
|
|
||
|
CLICK ON THE ENVELOPE AND SEND US
A MESSAGE! |
|||
|
Call us at 1-800-460-6474 or Fax your
request to 281-749-8117
To return to the Home Page, Click the Blue
Icon
|
|||
DAIHEN® MIG-BOY WGT-35 SPOOL GUN
REVOLUTION
EXTENDED
BARREL SPOOL GUN
