 |
||
| Home | Shop Online | |
DON'T SCRAP YOUR YOUR NITROGEN/C02 PLASMA SYSTEM; CONVERT IT TO SHOP AIR!
Many older plasma cutting systems used nitrogen for a plasma gas and C02 (or shop air) for their secondary gas. These units all use "high-frequency" pilot arc starting and cut very well! I would wager that there are hundreds (probably thousands) of these units sitting idle because they have been replaced with newer units that cut with shop air! I have been given perfectly good nitrogen plasma's-"if I would haul them off!
Example1: The Thermal-Dynamics Pak 5 is an excellent candidate for conversion to air, it runs on single or three phase power (there are different models for different line voltages-look on the ID plate on the back of the machine!) All that is required is a air regulator (and condensate trap) and the Alpha 2 Air Plasma torch!
Example 2: The Thermal-Dynamic Pak-10. Pak-22, Linde PCM-101 or PCM-100, all units are capable of cutting 1" plate at production speed and will sever 1.5" steel!
You can easily cut ONE INCH + with 100 AMPS!
FYI: Check with your welding supplier: How much will a new 100 amp plasma system cost you? (If you have a weak heart-please check with your doctor before making the call!)
This picture is of the Alpha 1 70" hand cutting torch. It will replace almost any OEM plasma torch, that uses "high-frequency" pilot arc starting. It is designed to cut with air, up to 150 AMPS (50%) duty cycle.
The Alpha Plasma torch comes either in a hand or machine torch configuration, with 20', 40', or 70' leads!. The consumables are very inexpensive, The torch is easy and inexpensive to maintain. Unlike many torches, the Alpha torch comes with built in "parts-in-place" safety feature. When the shield cap is removed, the machine CANNOT BE ENGAGED! There is no danger of the operator being accidentally shocked, while changing consumables.
THE UNDERLINED LINKS IN BLUE WILL TAKE YOU TO INFORMATION PAGES.
1. OEM Plasma Cutting Systems That Can be Retrofitted with The Alpha Plasma Torch
Email
us here.
Call us at 1-800-460-6474 or Fax your request to 281-749-8117
Auto Arc® is a registered trademark of Miller Electric,. Century® is a registered trademark of Century Mfg Co. Chicago Electric® is a registered trademark of Central Purchasing, LLC. Clarke® is a registered trademark of Clarke Power Products, Inc. Harbor Freight® is a registered trademark of Central Purchasing, LLC. Hobart® is a registered trademark of Hobart Bros. Co. Lincoln® is a registered trademark of the Lincoln Electric Co. Mac Tools® is a registered trademark of the Stanley Works. Marquette® is a registered trademark of the Lincoln Automotive Co. Matco Tools® is a registered trademark of Mechanics Custom Tools Corp. Miller® is a registered trademark of Miller Electric Mfd. Co., Pro Spot is a trademark of Pro Spot International. Snap-On® is a registered trademark of Snap-On Tool Corp. Solar® is a registered trademark of Century Mfg. Co. Systematics is a trademark of Systematics. Tweco® is a registered trademark of Tweco Products Inc. Esab®, Linde®, L-Tec®, Airco® are registered trademarks of Esab NA. ThermaCut® is a registered trademark of ThermaCut Inc., HTP® is a registered trademark of HTP America Inc.
WELDMART-ONLINE is not affiliated with Miller Electric, Miller weld, Illinois Tool Works, Century Mfg. Co,, Central Purchasing, LLC, Clarke Power Products, Inc., Daytona Mig, Hobart Bros Co,, the Lincoln Electric Co,, the Stanley Works, the Lincoln Automotive Co., Mechanics Custom Tools Corp, Pro Spot International, Snap-On Tools Corp, Sytematics, Bernard, Profax, Esab, ThermaCut, HTP America, or Tweco Products Inc. WELDMART-ONLINE supplies high quality replacement parts manufactured by or for WELDMART-ONLINE to demanding specifications. The parts are designed to be interchangeable and compatible with the aforementioned companies, are not OEM parts and are not endorsed by the aforementioned companies. We reserve the right to substitute original manufactures parts at anytime