This is an ARCHIVE version of our website provided FOR REFERENCE ONLY.
Information on this page may be inaccurate, especially regarding price and availability. Obsolete prices on a page that shows this header will not be honored.
For accurate and current information, be sure to visit our current website.

www.weldmart.com

                                          COMMON SENSE ANSWERS FOR THE WELDING FABRICATION INDUSTRY

CALL US: 800-460-6474                              FAX: 281-749-8117                      INTERNATIONAL: 1-281-432-0250

 

 

HYPERTHERM® PAC-130® PLASMA CUTTING TORCH

The PAC-130® plasma torch is Hypertherm, standard "gas cooled", 40 to 100 amp plasma torch. Hypertherm says that this torch will cut 1 1/4"; severs 1 1/2". You will find this torch on the Max 70®,  Max 80®, & Max 100®,  This torch uses  "high frequency" arc starting. It is available in hand and machine configurations with 25', 50' & 75 lead lengths. We offer all standard replacement parts, replacement individual leads, and complete lead assemblies.

PAC130--PTS-IMAGE.gif (44906 bytes)

NOTE: If you have an original Hypertherm PAC-130 hand torch head, (P/N: 020189) you will note that item "15", the "torch insulator" on your original Hypertherm IS NOT REPLACEABLE! It is only a matter of time until this insulator is damaged by "high frequency" degeneration or damage from the torch being dropped. If you go back to Hypertherm, you pay for a whole new torch head! With our version of the PAC-140, the damaged insulator screws off and a new one screws in it's place. Our torch head uses all Hypertherm parts listed on this page.

PAC130--PTS-TXT-IMAGE.gif (34434 bytes)

HAND TORCH BREAKDOWN

PAC140--hand-torch-IMAGE.gif (14591 bytes)

NOTE: If you have an original Hypertherm PAC-130 hand torch head, (P/N: 020189) you will note that item "9" is different from the Hypertherm handle. We offer this ergonomically designed handle as a replacement for the old style "tube". This handle must be used with our torch head P/N: 020112-1, but it comes with a new trigger switch assembly. Our torch head uses all Hypertherm parts listed on this page.

MACHINE TORCH BREAKDOWN

PAC140--machine-torch-IMAGE.gif (12495 bytes)

TORCH PARTS PART NUMBERS

PAC130--LEADS-TXT-IMAGE.gif (50578 bytes)


TO CONTACT  US OR TO PLACE AN ORDER, CLICK ON THE ENVELOPE AND SEND US A MESSAGE!

OR CALL US TOLL FREE AT 800-460-6474

SEND_US_MAIL_ANIMATED.GIF (14825 bytes)

CLICK ON THE CHAIN TO RETURN TO OUR HOME PAGE MOVING_CHAIN_ANIMATED.GIF (737 bytes)


Hypertherm and Max 20  are registered trademarks and property of Hypertherm Inc.. Weldmart-Online is in no way affiliated with Hypertherm Inc.  References to the named torches, machines, and part numbers are for the convenience of our customers only. This web page is copyrighted by Weldmart-Online 2002 and reproduction In any form is prohibited by law. The replacement parts, replacement torch heads, replacement cable assemblies and complete replacement troches are not Esab OEM items. Weldmart-Online reserves the right to substitute original OEM parts where necessary. The original graphics are copyright of Thermacut Inc. and are used with permission.