COMMON SENSE ANSWERS FOR THE WELDING FABRICATION INDUSTRY
THE AEC-200 SPOOL GUN SYSTEM THAT YOU CAN USE IN THE FIELD OR IN THE SHOP! FOR CP (CONSTANT VOLTAGE-"MIG" POWER SUPPLIES ONLY)
THE SPOOL GUN YOU WILL USE THE REST OF YOUR LIFE?
The AEC-200-4DM spool gun with the AEC-200-LVC control box allows the spool gun to be used on a constant potential (CP or Mig) power supply that does (or does not) have an internal contactor. This unit is a excellent spool gun upgrade for engine driven welders with 120 VAC auxiliary power. One complete system; nothing else to purchase-ready to weld, right out of the box! Best price, easiest to install, easiest to use, and the only gun that you can be assured that will not be "obsoleted".
This unit is designed for the welding of aluminum. It can be used to "short-arc" weld carbon steel (CO2-Argon mixed shielding gas). Self-shielded wire for out door construction. Weld stainless steel, copper, nickel, aluminum bronze, silicone bronze, and filler metal that can be purchased, or rewound on a standard 4" wire spool!
The AEC-200-4DM® is a Miller style direct connect spool gun with a standard 14 pin Miller® style Amphenol® plug. The power supply provides 24 VAC to the gun. The gun contains an internal solid state drive motor control, speed control pot, and mechanical gas valve. The positive power lead connects to the LVC box through the a provided Dinze weld power plug. You plug the gun into the connector on the box labeled "GUN". The gun has it's own gas hose with standard inert gas fittings-it screws directly into your gas flowmeter. The 14 pin gun plug screws into the receptacle on the LVC box.
NOTE: The AEC-200-4DM spool gun can be directly attached to any Miller®, Hobart®, Comparc®, and some older Thermal-Arc® power supplies that have the 14 pin receptacle.
CLICK ON THE ABOVE IMAGE TO VIEW THE 14 PIN POWER SUPPLY INFORMATION PAGE
CLICK ON THE ABOVE IMAGE TO VIEW THE 14 PIN POWER SUPPLY INFORMATION PAGE
The AEC-200-LVC® control box contains a 24 VAC step-down transformer, weld power contactor, 120 VAC power cable, welding lead connectors, and Dinze® weld.
You attach the positive power lead from your Mig power supply (it doesn't matter if the Mig power supply is electrical or engine driven) to the box with the provided Dinze weld power plug labeled "Electrode". The box requires 120 VAC to operate. Screw the 14 pin Amphenol gun plug into the LVC box. Plug the gun weld cable Dinze plug into the "Gun" receptacle. You are now read to weld!
The system AEC-200-LVC system is the ultimate in versatility, the gun will weld any alloy that can be had on a standard four inch spool. The gun will feed 0.025" thru 0.052" diameter wire. The gun is rated at 200 amps-100% duty cycle in argon gases. 300 amps in CO2.
With the LVC box the gun can be attached to any mig machine. The mig power supply's contactor must be turned on, the contactor in the LVC controls the weld power. With this system you can use your gun on any mig machine in house and then quickly remove it and use it on any engine driven mig power supply in the field.
The spool gun has enough power to push solid, gas shielded flux-core, and self-shielded ("Intershield®") wire. No other system can provide the versatility, ease of set-up, low cost, long life and low consumable cost.
You can be assured that this system will not be obsoleted. The original AEC-200-36 (originally known as an Airco® 20-E gun) which came on the market in the late 1960's, is still sold in it's near original form today. Weldmart has every part, piece, bolt, nut, screw, washer, connector, cable, and decal available for this gun and control box. Can you your local (fill in the blank:_______) welding supply distributor make the same claim?
As a side note; we suggest that upon receiving your AEC-200 spool gun, that you contact your attorney. Have your AEC-200 system put into your will-we belief that it will still be useable and maintainable, when we are all, long dead an gone. Give to someone so they can be become productive and self-sufficient!
Click on the buy now Button to purchase our gun package online. Please note that the guns shown are sold with the standard barrel.
  |
a) AEC-200 SPOOL GUN KIT (25' Leads) |
P/N: WM-0260 | |
|
|
b) AEC-200 SPOOL GUN (50' Leads) | P/N: WM-0261 | |
|
|
c) AEC-200-SPOOL GUN (75' Leads) | P/N: WM-0262 | |
|
|
d) AEC-200-GUN (100' Leads) | P/N: WM-0263 |
All prices include normal UPS-Ground freight paid to any continental US address. Deliveries to Alaska, Hawaii, and Canada will be quoted upon order placement.
CLICK ON THE ENVELOPE TO SEND US A MESSAGE!
NOTE: Original graphics copyright Profax Inc. used by permission. Profax is a registered trademark. This webpage is copyright 2010, by Weldmart-Online. All rights reserved, no portion of this page can be reproduced in any form with prior written permission.